| 中心高 |
Height of centers over bed |
110mm |
| 两顶尖间最大距离 |
Max.distance between two centers |
520mm/350mm |
| 床面上最大回转直径 |
Max.swing diameter over bed |
200mm |
| 刀架上最大回转直径 |
Max.swing diameter over carriage |
122m |
| 车削最大长度 |
Max.length of turning |
520mm/350mm |
| 主轴孔径 |
Spindle hole diameter |
20mm |
| 主轴锥孔锥度 |
Spindle tape bore |
No.3 |
| 主轴工作转速种数 |
Spindle speeds |
6 kinds |
| 主轴每分钟转速 |
Spindle speeds forward(rpm)per minute reverse |
120-2000r/min |
| 车削公制螺纹种数 |
Number of metric screw threads truning |
11 kinds |
| 车削公制螺纹螺距 |
Screw pitch of metric size screw threads turning |
0.4-4mm |
| 车削英制螺纹种数 |
Number of inch size screw threads truning |
|
| 车削英制螺纹螺距 |
Screw pitch of inch size screw threads turning |
|
| 纵向进给量种数 |
Number of lingitudinal feeds |
11 kinds |
| 纵向进给量范围 |
Range of longitudinal feeds |
0.04-0.3mm |
| 走刀丝杆外径 |
External diameter of feed screw |
20mm |
| 走刀丝杆螺距 |
Screw pitch of feed screw |
3mm |
| 齿条模数 |
Pack modulus |
2 |
| 小刀架最大行程 |
Max.travel of compound rest |
70mm |
| 小刀架转动最大角度 |
Max.turning angle of the compound rest |
±45° |
| 刀架横向最大行程 |
Max.transversal travel of carriage |
115 |
| 床鞍纵向最大行程(手动) |
Max.longitudinal travel of saddle(manual) |
520mm/350mm |
| 尾座套筒锥孔锥度 |
Taper bore of tailstock barrel |
No.2 |
| 尾座套筒最大移动量 |
Max.travel of tailstock barrel |
50mm |
| 电动机功率/电压/频率 |
Power of motor voltage frequency |
370W 220W,50Hz(110V,60Hz) |
| 机床外形尺寸(L*W*H) |
Overall dimension of the machine tool(L*W*H) |
125*57*56cm/110*57*56cm |
| 机床重量 |
Weight of machine tool |
110kg/130kg |
(本样本所列表数据如有变动,恕不另行通知书 The sample given herein are subject to alternation sithort notice)
